Cleaning Auto Hardware

Cleaning the hardware you remove from an auto project before re-installing is a great way to prolong the life of the hardware and improve the end result of the project.  Most auto hardware will have grease, rust and other forms of oxidation. Most automakers do not use aluminum or stainless steel hardware and this can lead to tough removals and damaging re-installation.

By cleaning the hardware before re-installation, you will be much happier with the final result.  An ultrasonic cleaner, the right chemistry and a wire brush are all you should need for most applications.  WashandDeburr.com offers:

ViChem VL-557 for rust, slag and oxidation removal

ViChem VL-750 for most degreasing applications

The operator would fill their ultrasonic tank with water and ViChem biodegradable/non-hazardous chemistry, bring the tank to temperature (typically between 120F-140F) and turn on the sonic energy.  Most processes take less than 10 minutes and you will be amazed with the results. 

WashandDeburr.com offers Graymills ultrasonic cleaners in a variety of sizes. Please contact us to arrange for free testing to prove that this technology is right for you.